Construction : 2021 Pavement Maintenance Program


Feb 10, 2021

Project Details


Bath Township, Boston Township, Copley Township, Coventry Township, Northfield Center, Richfield Township, Sagamore Hills Township, Springfield Township, Twinsburg Township

Project Contacts:

Sam Ross, PE, Construction Section Manager

Project Schedule

Plan Year:

05-03-2021 - 11-30-2021

Download bid packet


Download Bid Packet

The Pavement Maintenance Program includes hot mix resurfacing, chip and seal resurfacing, motor paving, asphalt rejuvenation, crack sealing, and pavement marking on various County roads. The list of roads is below.  

405 resurfacing is also known as Motor Paving. The contractor uses a stationary plant on-site to prepare the asphalt mixture, places it on the roadway, and compacts the mixture with a roller. 422 (chip seal) is then placed on top of the 405.

422 resurfacing is also known as a chip seal. The contractor places an asphalt emulsion on the roadway, spreads gravel on top of the emulsion, compacts the stone into the emulsion with a roller, and then sweeps the excess gravel from the road the same day. Sweeps are repeated about a week later to ensure loose gravel is completely removed from the roadway.

448 resurfacing is also known as Hot Mix Asphalt. The asphalt is prepared in an asphalt plant, transported to the site in heated trucks, placed on the roadway in the desired thickness, and then compacted with a roller.  448 is the most durable (and most expensive) asphalt pavement and resists rutting and can handle heavier traffic loads more than 405 and 422 resurfacing.  It is used in locations that have heavy traffic and a high percentage of truck traffic.

Asphalt Rejuvenation: An asphalt rejuvenating agent is applied to hot mix asphalt pavement that was placed one or two years ago.  The agent restores flexibility and water resilience that the asphalt surface lost due to weathering and the passage of time. Forty-five minutes after the rejuvenating agent is applied, sand is placed over the agent to absorb excess agent and provide enhanced vehicle traction.  One week later, the excess sand will be swept from the road surface.

Crack sealing is a method in which hot sealant is applied to existing cracks in the roadway to prevent water intrusion.


The 441 North and 441 South program bids were due March 10th. The 405 and 422 program bids were due March 5th. Please visit to view and bid on the projects. The Concrete Road program will be out to bid soon with bids due March 19th. The list of proposed pavement maintenance roads is attached below.


Image of Summit County Map with Cities, Villages, and Townships Highlighted




Funding Sources:

Motor Vehicle and Gas Tax funds and Surface Transportation Block Grant funds